Panasonic ideas for life
Search Panasonic Global Site
PT-DZ870E Серия

Варианты установки

Standard Setting-up Positions

PT-DZ870

  • unit: mm (inch)
  • L: Distance to screen
    H: Height from the edge of screen to center of lens
  • *1 When the lens protrudes to the maximum.
    84 mm (3-5/16 in) with the ET-DLE085
    43 mm (1-11/16 in) with the supplied lens
    44 mm (1-23/32 in) with the ET-DLE150
    45 mm (1-25/32 in) with the ET-DLE250
    51 mm (2 in) with the ET-DLE350
    95 mm (3-3/4 in) with the ET-DLE450
    27 mm (1-1/16 in) with the ET-DLE055
  • *2 Adjustable in 40 mm (1-9/16 in) steps.
NOTE:
Illustrations show the projector installed using optional ceiling mount bracket ET-PKD120H, optional bracket assembly ET-PKD120B and an optional lens.
This illustration is not drawn to scale.
Caution:
• All construction work should be done by a qualified technician.
• When mounting to the ceiling, use the special mounting bracket. Furthermore, in order to prevent it from falling down from the ceiling, use the supplied wire on the mounting bracket.

Standard setting-up positions with the ET-DLE030

NOTE: L4 is not the distance from the projector’s rear panel to a wall, but the distance from the projector’s rear panel to the screen. Provide an exhaust cooling space of 500 mm (1 foot 8 inches) or more between the rear panel of the projector and a wall or other obstruction. If installing it in an enclosed space, add a separate air conditioning or ventilation system. If ventilation is insufficient, exhaust heat may accumulate and trip the projector’s protective circuit.

L1: Projection distance
(from screen to mirror reflective surface)

L2: From screen to tip of lens

L3: From screen to front of set

L4: From screen to rear of set

A1: From bottom edge of screen to top of set

A2: From bottom edge of screen to bottom of set

Caution:
• All construction work should be done by a qualified technician.
• When mounting to the ceiling, use the special mounting bracket. Furthermore, in order to prevent it from falling down from the ceiling, use the supplied wire on the mounting bracket.

NOTE:
• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• The zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.
• When the ET-DLE055 is mounted, the optical lens shift function cannot be used.

Projection distance with the ET-DLE030 (screen aspect ratio 16:10)

NOTE:
• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• The zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.
• When the ET-DLE055 is mounted, the optical lens shift function cannot be used.

NOTE:
• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• The zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.
• When the ET-DLE055 is mounted, the optical lens shift function cannot be used.

For a screen size different from the above, use the equation below to calculate the projection distance.

Aspect ratio 16 : 10

ET-DLE085 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0174 - 0.0471
L (m) = (diagonal screen size in inches) × 0.0216 - 0.0442
ET-DLE150 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0286 - 0.0540
L (m) = (diagonal screen size in inches) × 0.0413 - 0.0498
Supplied lens minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0379 - 0.0746
L (m) = (diagonal screen size in inches) × 0.0529 - 0.0725
ET-DLE250 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0500 - 0.0800
L (m) = (diagonal screen size in inches) × 0.0789 - 0.0792
ET-DLE350 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0787 - 0.1351
L (m) = (diagonal screen size in inches) × 0.1190 - 0.1346
ET-DLE450 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1192 - 0.3017
L (m) = (diagonal screen size in inches) × 0.1885 - 0.2991
ET-DLE055 (fixed focus) L (m) = (diagonal screen size in inches) × 0.0175 - 0.0476
ET-DLE030 (fixed focus) L1 (m) = (diagonal screen size in inches) × 0.00814 + 0.00467
A1 (m) = (diagonal screen size in inches) × 0.00502 - 0.07210

Aspect ratio 16 : 9

ET-DLE085 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0179 - 0.0471
L (m) = (diagonal screen size in inches) × 0.0222 - 0.0442
ET-DLE150 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0294 - 0.0540
L (m) = (diagonal screen size in inches) × 0.0424 - 0.0498
Supplied lens minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0389 - 0.0746
L (m) = (diagonal screen size in inches) × 0.0543 - 0.0725
ET-DLE250 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0513 - 0.0800
L (m) = (diagonal screen size in inches) × 0.0811 - 0.0792
ET-DLE350 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0809 - 0.1351
L (m) = (diagonal screen size in inches) × 0.1223 - 0.1346
ET-DLE450 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1225 - 0.3017
L (m) = (diagonal screen size in inches) × 0.1937 - 0.2991
ET-DLE055 (fixed focus) L (m) = (diagonal screen size in inches) × 0.0180 - 0.0476

Aspect ratio 4 : 3

ET-DLE085 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0197 - 0.0471
L (m) = (diagonal screen size in inches) × 0.0244 - 0.0442
ET-DLE150 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0324 - 0.0540
L (m) = (diagonal screen size in inches) × 0.0467 - 0.0498
Supplied lens minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0429 - 0.0746
L (m) = (diagonal screen size in inches) × 0.0599 - 0.0725
ET-DLE250 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0565 - 0.0800
L (m) = (diagonal screen size in inches) × 0.0893 - 0.0792
ET-DLE350 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0891 - 0.1351
L (m) = (diagonal screen size in inches) × 0.1347 - 0.1346
ET-DLE450 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1349 - 0.3017
L (m) = (diagonal screen size in inches) × 0.2133 - 0.2991
ET-DLE055 (fixed focus) L (m) = (diagonal screen size in inches) × 0.0198 - 0.0476
NOTE:
Distances calculated with the above equations will include a slight error.

PT-DW830

  • unit: mm (inch)
  • L: Distance to screen
    H: Height from the edge of screen to center of lens
  • *1 When the lens protrudes to the maximum.
    84 mm (3-5/16 in) with the ET-DLE085
    43 mm (1-11/16 in) with the supplied lens
    44 mm (1-23/32 in) with the ET-DLE150
    45 mm (1-25/32 in) with the ET-DLE250
    51 mm (2 in) with the ET-DLE350
    95 mm (3-3/4 in) with the ET-DLE450
    27 mm (1-1/16 in) with the ET-DLE055
  • *2 Adjustable in 40 mm (1-9/16 in) steps.
NOTE:
Illustrations show the projector installed using optional ceiling mount bracket ET-PKD120H, optional bracket assembly ET-PKD120B and an optional lens.
This illustration is not drawn to scale.
Caution:
• All construction work should be done by a qualified technician.
•When mounting to the ceiling, use the special mounting bracket. Furthermore, in order to prevent it from falling down from the ceiling, use the supplied wire on the mounting bracket.

Standard setting-up positions with the ET-DLE030

NOTE: L4 is not the distance from the projector’s rear panel to a wall, but the distance from the projector’s rear panel to the screen. Provide an exhaust cooling space of 500 mm (1 foot 8 inches) or more between the rear panel of the projector and a wall or other obstruction. If installing it in an enclosed space, add a separate air conditioning or ventilation system. If ventilation is insufficient, exhaust heat may accumulate and trip the projector’s protective circuit.

L1: Projection distance
(from screen to mirror reflective surface)

L2: From screen to tip of lens

L3: From screen to front of set

L4: From screen to rear of set

A1: From bottom edge of screen to top of set

A2: From bottom edge of screen to bottom of set

Caution:
• All construction work should be done by a qualified technician.
• When mounting to the ceiling, use the special mounting bracket. Furthermore, in order to prevent it from falling down from the ceiling, use the supplied wire on the mounting bracket.

NOTE:
• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• The zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.
• When the ET-DLE055 is mounted, the optical lens shift function cannot be used.

Projection distance with the ET-DLE030 (screen aspect ratio 16:10)

NOTE:
• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• The zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.
• When the ET-DLE055 is mounted, the optical lens shift function cannot be used.

For a screen size different from the above, use the equation below to calculate the projection distance.

Aspect ratio 16 : 10

ET-DLE085 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0183 - 0.0471
L (m) = (diagonal screen size in inches) × 0.0227 - 0.0442
ET-DLE150 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0300 - 0.0540
L (m) = (diagonal screen size in inches) × 0.0433 - 0.0498
Supplied lens minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0398 - 0.0746
L (m) = (diagonal screen size in inches) × 0.0555 - 0.0725
ET-DLE250 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0524 - 0.0800
L (m) = (diagonal screen size in inches) × 0.0828 - 0.0792
ET-DLE350 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0827 - 0.1351
L (m) = (diagonal screen size in inches) × 0.1249 - 0.1346
ET-DLE450 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1251 - 0.3017
L (m) = (diagonal screen size in inches) × 0.1979 - 0.2991
ET-DLE055 (fixed focus) L (m) = (diagonal screen size in inches) × 0.0184 - 0.0476
ET-DLE030 (fixed focus) L1 (m) = (diagonal screen size in inches) × 0.00855 + 0.00467
A1 (m) = (diagonal screen size in inches) × 0.00660 - 0.07396

Aspect ratio 16 : 9

ET-DLE085 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0188 - 0.0471
L (m) = (diagonal screen size in inches) × 0.0233 - 0.0442
ET-DLE150 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0309 - 0.0540
L (m) = (diagonal screen size in inches) × 0.0445 - 0.0498
Supplied lens minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0409 - 0.0746
L (m) = (diagonal screen size in inches) × 0.0571 - 0.0725
ET-DLE250 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0539 - 0.0800
L (m) = (diagonal screen size in inches) × 0.0851 - 0.0792
ET-DLE350 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0850 - 0.1351
L (m) = (diagonal screen size in inches) × 0.1284 - 0.1346
ET-DLE450 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1286 - 0.3017
L (m) = (diagonal screen size in inches) × 0.2034 - 0.2991
ET-DLE055 (fixed focus) L (m) = (diagonal screen size in inches) × 0.0189 - 0.0476
NOTE:
Distances calculated with the above equations will include a slight error.

PT-DX100

  • unit: mm (inch)
  • L: Distance to screen
    H: Height from the edge of screen to center of lens
  • *1 When the lens protrudes to the maximum.
    84 mm (3-5/16 in) with the ET-DLE085
    43 mm (1-11/16 in) with the supplied lens
    44 mm (1-23/32 in) with the ET-DLE150
    45 mm (1-25/32 in) with the ET-DLE250
    51 mm (2 in) with the ET-DLE350
    95 mm (3-3/4 in) with the ET-DLE450
    27 mm (1-1/16 in) with the ET-DLE055
  • *2 Adjustable in 40 mm (1-9/16 in) steps.
NOTE:
Illustrations show the projector installed using optional ceiling mount bracket ET-PKD120H, optional bracket assembly ET-PKD120B and an optional lens.
This illustration is not drawn to scale.
Caution:
• All construction work should be done by a qualified technician.
•When mounting to the ceiling, use the special mounting bracket. Furthermore, in order to prevent it from falling down from the ceiling, use the supplied wire on the mounting bracket.

Standard setting-up positions with the ET-DLE030

NOTE: L4 is not the distance from the projector’s rear panel to a wall, but the distance from the projector’s rear panel to the screen. Provide an exhaust cooling space of 500 mm (1 foot 8 inches) or more between the rear panel of the projector and a wall or other obstruction. If installing it in an enclosed space, add a separate air conditioning or ventilation system. If ventilation is insufficient, exhaust heat may accumulate and trip the projector’s protective circuit.

L1: Projection distance
(from screen to mirror reflective surface)

L2: From screen to tip of lens

L3: From screen to front of set

L4: From screen to rear of set

A1: From bottom edge of screen to top of set

A2: From bottom edge of screen to bottom of set

Caution:
• All construction work should be done by a qualified technician.
• When mounting to the ceiling, use the special mounting bracket. Furthermore, in order to prevent it from falling down from the ceiling, use the supplied wire on the mounting bracket.

NOTE:
• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• The zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.

NOTE:
• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• When the ET-DLE055 is mounted, the optical lens shift function cannot be used.

Projection distance with the ET-DLE030 (screen aspect ratio 4:3)

For a screen size different from the above, use the equation below to calculate the projection distance.

Aspect ratio 4 : 3

ET-DLE085 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0170 - 0.0471
L (m) = (diagonal screen size in inches) × 0.0211 - 0.0442
ET-DLE150 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0280 - 0.0540
L (m) = (diagonal screen size in inches) × 0.0403 - 0.0498
Supplied lens minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0370 - 0.0746
L (m) = (diagonal screen size in inches) × 0.0517 - 0.0725
ET-DLE250 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0488 - 0.0800
L (m) = (diagonal screen size in inches) × 0.0771 - 0.0792
ET-DLE350 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0770 - 0.1351
L (m) = (diagonal screen size in inches) × 0.1163 - 0.1346
ET-DLE450 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1165 - 0.3017
L (m) = (diagonal screen size in inches) × 0.1842 - 0.2991
ET-DLE055 (fixed focus) L (m) = (diagonal screen size in inches) × 0.0171 - 0.0476
ET-DLE030 (fixed focus) L1 (m) = (diagonal screen size in inches) × 0.00796 + 0.00467
A1 (m) = (diagonal screen size in inches) × 0.00478 - 0.07149
NOTE:
Distances calculated with the above equations will include a slight error.