Panasonic ideas for life
Search Panasonic Global Site
PT-DZ680E Серия

Гибкость системы и множество функций

Flexible Installation

The wide adjustment range of the powered horizontal/vertical lens shift function assures convenience and versatility
during installation. It lets you easily make adjustments with the remote control. The unit can also be rotated 360
degrees vertically. This means you can install it at any angle you want, to accommodate different installation conditions.

Horizontal / Vertical Lens Shift

NOTE: This illustration shows the lens shift of the PT-DZ680S/K, DX610S/K.

Flexible Angle Setting

A Wide Range of Optional Lenses

Choose from a wide lineup of optional lenses for your system, including short-throw, long-throw zoom and fixed-throw lenses for rear projection use.
The additional lenses make it easy to adapt your projector to the installation site.
The lenses attach and detach with one-touch ease.

Lens-centered Design

A lens-centered, symmetrical design provides ease of installation, eliminating the need for any special considerations when planning the installation site.

Easy Replacement of Filter and Lamp

An Eco Filter is replaced from the side and lamps are replaced from the back panel. Both of them are replaced very easily even after the projector is installed on the ceiling.

Multi-Screen Support System Seamlessly Connects Multiple Screens

The Multi-Screen Support System optimally adjusts multiple screens: Edge blending, color matching and multi-screen processor.

Edge Blending

The edges of adjacent screens can be blended and their luminance controlled.

Color Matching

This function corrects for slight variations in the color reproduction range of individual projectors.

Multi-Screen Processor

The PT-DZ680 Series projectors can project large, multi-screen images without any additional equipment. Up to 100 units (10 x 10) can be edge-blended at a time.

Side-by-Side Function* (PT-DZ680/DW640)

The PT-DZ680 and PT-DW640 can simultaneously display images from two sources onto a single screen. For example, you can display a PC image on the left and a video image on the right.
Taking advantage of the wide-screen projection, this function gives you a host of new application possibilities to explore.

* This function is not effective for some source combinations.

Versatile System Configurations Match a Variety of Applications

The wide-ranging terminals include 2 sets of RGB inputs (compatible with Y/PB/PR signals), an HDMI input,
and a DVI-D input. A serial input/output terminal (RS-232C compliant) that allows remote operation from a PC,
similar to that of a wireless remote control, and a remote terminal for input switching by contact control and
standby ON/OFF operation also make it possible to configure a remote operation system.

Easy Remote Monitoring and Control over a LAN

Web browser on a computer connected through a wired LAN system lets you remotely operate projectors and check their status. An e-mail messaging function can also notify you when a lamp needs replacement, and indicate the overall projector status.

In addition, Multi Projector Monitoring and Control Software is available for monitoring and controlling multiple Panasonic projectors from a single PC.

The wired LAN terminal is compatible with PJLink™ (class1), an open protocol that is used by many manufacturers, to enable integrated control of systems that contain different brands of projectors.

Crestron RoomView™ and AMX Device Discovery

The LAN terminal allows a computer connected to the network to use Crestron RoomView™ application software to manage and control system devices.
Besides, the AMX Device Discovery technology is built in the
PT-DZ680 Series projectors.

Wireless Remote Control with a Maximum Operating Range of 30 m (98 ft)

Wireless Remote Control provides greater convenience for large conference rooms, lecture halls and gymnasiums with large audiences. Also, two signal transmission ports are provided to enable a large operating area.

Signal transmission ports

Standby Mode: ECO*

The PT-DZ680 Series projector has attained a low standby power level of 0.2 W** (STANDBY MODE: ECO*). It also helps to slash running costs, and reduces environmental impact.

* When the STANDBY MODE is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.
** For 120 V AC power supply. 0.3 W for 200-240 V AC power supply.

Made in Japan

Made in JapanThe PT-DZ680 Series projectors are carefully manufactured at the Panasonic factory in Japan, under strict quality control. This is another, very important advantage of a Panasonic projector.

Other Valuable Features

  • • 3D color management system
  • • HD IP conversion
  • • Digital noise reduction
  • • Dynamic sharpness control
  • • Scheduling function
  • • Mechanical lens shutter
  • • Direct Power Off allows unplugging the power cord right after use