Panasonic ideas for life
Search Panasonic Global Site
PT-DZ13KE Серия

Гибкость системы и множество функций

System Integration Flexibility

Flexible Installation

The wide adjustment range of the powered horizontal/vertical lens shift function can be easily adjusted with the remote control. The unit can also be rotated 360° vertically, to accommodate various installation conditions. The lens-centered design contributes to easy Installation.

Lens Memory*

The settings of projection size, lens shift position, and focus/zoom can be stored in memory and recalled for instant switching.

* The settings stored in memory and the projection condition after recall may not match perfectly.

Example of Lens Memory Settings

A Wide Selection of Lenses (optional)

Choose from a wide lineup of lenses for your system, including short-throw, long-throw zoom and fixed-throw lenses for rear projection use. The additional lenses make it easy to adapt your projector to the installation site. The lenses attach and detach with one-touch ease.

Geometric Adjustment* for Specially Shaped Screens (PT-DZ13K/DS12K/DZ10K)

This function adjusts the image for projection onto spherical, cylindrical and other specially shaped screens. You can make the adjustment easily using only the remote control, with no external equipment needed.
New Geometric Adjustment has 4-Corner Adjustment and Keep Aspect Off functions for simple and fine adjustment.

* New Geometric Adjustment: For the PT-DZ13K/DS12K only. The PT-DZ10K has the same Geometric Adjustment function that is featured on the previous models. The PT-DW11K features neither of them.

4 corner adjust

Each corner can be independently adjusted, and up to three sets of adjusted data can be stored.

Keep aspect on/off

You can keep the aspect on when correcting curves. To make effective use of the screen area, you can also turn the aspect-keeping function off.

Optional Upgrade Kit (ET-UK20) Featuring Geometry Manager Pro (PT-DZ13K/DS12K)

The new Geometry Manager Pro software included in the optional upgrade kit ET‐UK20 supports Color Matching, Edge Blending, uniformity correction, and other useful functions for multi‐projector setups (max. 32 units).
It also allows creative masking using four lines or bitmap data. And its flexible and complex geometric adjustment capability suits a wide variety of screen shapes.

Supported Projectors PT-DZ13K, PT-DS12K
Connection LAN / RS232C
OS Windows7(64bit/32bit), Vista(64bit/32bit), XP(32bit)
Number of Projectors 32 sets (Max), Available to be Controlled
Key Functions - Geometric Adjustment
- Edge Blending
- Masking
- Uniformity Control
- Multi PJ / Screen Pro Adjusting Software
Activation Method - Get the Activation Pass-code through 'PASS' System
Projector Asset Support System (PASS)

* For more details on the optional upgrade kit ET-UK20, please visit the above website.

Masking Function

Line masking

Set masking by line.

Use it to overlap the projection image.

The image is projected only in the designated areas.

Bitmap masking

Create masking data.

Use it to overlap the projection image.

The image is projected only in the designated areas.

* Detailed masking is also possible with an image of up to 1,920 by 1,200 pixels for the PT-DZ13K and 1,400 by 1,050 pixels for the PT-DS12K.

Multi-Unit Brightness Control

This function automatically corrects the brightness fluctuations that occur over time in the individual projectors of a
multi-screen system. Up to eight projectors can be controlled by connecting to each other via a hub, and this can be
increased to a maximum of 2,048 projectors by using “Multi Projector Monitoring & Control Software Ver. 2.8."

Multi Projection System

Multi-Screen Support System Seamlessly Connects Multiple Screens

The Multi-Screen Support System optimally adjusts multiple screens: Edge blending, color matching.

Edge Blending

The edges of adjacent screens can be blended and their luminance controlled.

Color Matching

This function corrects for slight variations in the color reproduction range of individual projectors. The PC software assures easy, accurate control.

Multi-Screen Processor

The PT-DZ13K Series can project large, multi-screen images without any additional equipment. Up to 100 units (10 x 10) can be edge-blended at a time.

Portrait Mode Capability (optional)*

Portrait projection is possible by mounting the optional ET-LAD320P or ET-LAD320PW lamp units, updating the projector's firmware to MAIN Ver. 2.00 or later, and installing the projector with its terminal side surface facing downward.
Portrait mode adds more solutions for projection mapping, staging, and other needs.

Note: Please contact your sales representative for information on portrait orientation.

* Please contact the sales representative with regard to the frame for portrait orientation. Installation is possible only with the terminal side facing downward. Horizontal rotation and vertical rotation are both limited to 15 degrees. Also, the lamp replacement cycle becomes 500 hours, and this cycle is affected by the usage environment. In Portrait mode, the maximum brightness becomes 10,600 lm for the PT-DZ13K/DS12K and 9,600 lm for the PT-DW11K.

** To check the firmware version, press the <STATUS> button on the remote control. [MAIN VERSION] of the firmware can be checked on the [STATUS] menu screen.

*** The ET-LAD320P and ET-LAD320PW cannot be used when the projector is in landscape orientation.

Firmware** (MAIN Ver. 2.00 or later)+Replacement lamp unit for portrait mode (ET-LAD320P/ET-LAD320PW***)

Brightness by model and LAMP POWER in Portrait mode:

  PT-DZ13K /
Lamp for Portrait mode
(10,600 lm)
(9,600 lm)
(10,600 lm)
ECO mode
(9,500 lm)
ECO mode
(8,700 lm)
ECO mode
(9,500 lm)
HIGH mode not available -

Multiple Terminals with HD-SDI Compatibility

The PT-DZ13K Series has an array of terminals, including two SDI (Dual Link HD-SDI, 3G SDI and HD SDI),* 3D sync,**
DVI-D and HDMI terminals.

* For the PT-DZ13K and PT-DS12K only. The PT-DZ10K has one SDI connector and does not accept dual-link HD SDI signals.
** Not featured on the PT-DZ10K.

Easy Remote Monitoring and Control over a LAN

Web browser on a computer connected through a wired LAN system lets you remotely operate projectors and check their status. An e-mail messaging function can also notify you when a lamp needs replacement, and indicate the overall projector status.

In addition, Multi Projector Monitoring and Control Software ver. 2.8 is available for monitoring and controlling multiple Panasonic projectors from a single PC.

The wired LAN terminal is compatible with PJLink™ (class1), an open protocol that is used by many manufacturers, to enable integrated control of systems that contain different brands of projectors.

Crestron RoomView™ and AMX Device Discovery

The LAN terminal allows a computer connected to the network to use Crestron
RoomView™ application software to manage and control system devices.
Besides, The AMX Device Discovery technology is built in the PT-DZ13K Series projector.

Other Valuable Features

• P-in-P function*

• Mechanical lens shutter with fade in/out effect

• Scheduling function

• Direct power off

• 30 m long-range wireless remote control with LED backlight

• Anti-theft features with chain opening

• Control device setup function

• ID assignment for up to 64 units

• Built-in test pattern

•Selectable 10-language on-screen menu
(English, German, French, Spanish, Italian, Portuguese, Russian, Japanese, Chinese, Korean)

• RoHS Directive compliant

* This function cannot be used with some input signals and selected inputs.

All PT-DZ13K Series projectors are carefully manufactured at the Panasonic factory in Japan, under strict quality control.
This is another, very important advantage of a Panasonic projector.