The wide adjustment range of the powered horizontal/vertical lens shift function assures convenience and versatility
during installation. It lets you easily make adjustments with the remote control. The unit can also be rotated 360
degrees vertically. This means you can install it at any angle you want, to accommodate different installation conditions.
Horizontal/Vertical Lens Shift
NOTE: This illustration shows the lens shift of the PT-DZ770K.
Flexible Angle Setting
Choose from a wide lineup of optional lenses for your system, including short-throw, long-throw zoom and fixed-throw lenses for rear projection use.
The additional lenses make it easy to adapt your projector to the installation site.
The lenses attach and detach with one-touch ease.
A lens-centered, symmetrical design provides ease of installation, eliminating the need for any special considerations when planning the installation site.
An Eco Filter is replaced from the side and lamps are replaced from the back panel. Both of them are replaced very easily even after the projector is installed on the ceiling.
The Multi-Screen Support System optimally adjusts multiple screens: Edge blending, color matching and multi-screen processor.
The edges of adjacent screens can be blended and their luminance controlled.
This function corrects for slight variations in the color reproduction range of individual projectors.
The PT-DZ770 Series projectors can project large, multi-screen images without any additional equipment. Up to 100 units (10 x 10) can be edge-blended at a time.
The PT-DZ770K and PT-DW740S can simultaneously display images from two sources onto a single screen. For example, you can display a PC image on the left and a video image on the right.
Taking advantage of the wide-screen projection, this function gives you a host of new application possibilities to explore.
* This function is not effective for some source combinations.
The wide-ranging terminals include 2 sets of RGB inputs (compatible with Y/P B /P R signals), an HDMI input,
and a DVI-D input. A serial input/output terminal (RS-232C compliant) that allows remote operation from a PC,
similar to that of a wireless remote control, and a remote terminal for input switching by contact control and
standby ON/OFF operation also make it possible to configure a remote operation system.
Web browser on a computer connected through a wired LAN system lets you remotely operate projectors and check their status. An e-mail messaging function can also notify you when a lamp needs replacement, and indicate the overall projector status.
In addition, Multi Projector Monitoring and Control Software is available for monitoring and controlling multiple Panasonic projectors from a single PC.
The wired LAN terminal is compatible with PJLink™ (class1), an open protocol that is used by many manufacturers, to enable integrated control of systems that contain different brands of projectors.
The LAN terminal allows a computer connected to the network to use Crestron RoomView™ application software to manage and control system devices.
Besides, The AMX Device Discovery technology is built in the
Wireless Remote Control provides greater convenience for large conference rooms, lecture halls and gymnasiums with large audiences. Also, two signal transmission ports are provided to enable a large operating area.
The PT-DZ770 Series projectors have attained a low standby power level of 0.2 W** (standby mode: eco). It also helps to slash running costs, and reduces environmental impact.
* When the standby mode is set to eco, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.
** For 120 V AC power supply. 0.3 W for 200-240 V AC power supply.
The PT-DZ770 Series projectors are carefully manufactured at the Panasonic factory in Japan, under strict quality control. This is another, very important advantage of a Panasonic projector.
• 3D color management system
• HD IP conversion
• Digital noise reduction
• Dynamic sharpness control
• Mechanical lens shutter
• Direct Power Off allows unplugging the power cord right after use
Silver cabinet models of the PT-DZ770K and PT-DZ770LK are also
available as built-to-order.
The specifications are the same as those of the PT-DZ770K and PT-DZ770LK.
Black cabinet models of the PT-DW740S/DX810S and PT-DW740LS/
DX810LS are also available as built-to-order.
The specifications are the same as those of the PT-DW740S/DX810S
and PT-DW740LS/DX810LS respectively.